Model NO.: JTA2160G1A
Cooling Way: Water Cooled, Air Cooled, CHP, Cchp
Power Range: 547kw
Gas Methane: Biogas CH4:60%, CO2:40%; Natural Gas
Certticates: ISO, CE, BV, GOST, SGS, etc
Warranty: 1 Year or 1200 Working Hours
After-Sales Service Provided: Engineers Available to Service Machinery Overseas
Gas Train: Ball Valve, Gas Filter, Gas Regulator, Gas Control
Nox Emission: 100% Load Below 500mg/Nm3
Trademark: Googol
Transport Package: Standard
Specification: ISO3046, ISO8528
Origin: China
HS Code: 8502120000
Model NO.: JTA2160G1A
Cooling Way: Water Cooled, Air Cooled, CHP, Cchp
Power Range: 547kw
Gas Methane: Biogas CH4:60%, CO2:40%; Natural Gas
Certticates: ISO, CE, BV, GOST, SGS, etc
Warranty: 1 Year or 1200 Working Hours
After-Sales Service Provided: Engineers Available to Service Machinery Overseas
Gas Train: Ball Valve, Gas Filter, Gas Regulator, Gas Control
Nox Emission: 100% Load Below 500mg/Nm3
Trademark: Googol
Transport Package: Standard
Specification: ISO3046, ISO8528
Origin: China
HS Code: 8502120000
50Hz 547kW Googol Genset Use Gas Electric Power Engine       Â
| Engine Model | Â | JTA2160-G1A |
| Speed | rpm | 1500 |
| Frequency | Hz | 50 |
| Rating Output | Â | Â |
| Ramda Value | Â | 1.70 |
| Continuous Output | kW | 547 |
| BMEP for Continuous Output | bar | 12.38 |
| Fan Reduction | kW | 4.0 |
| Single Fan Reduction | kW | 3.6 |
| Fan Quantity | rpm | 1460 |
| Basic Performance Datasheet | Â | Â |
| Aspiration Type | Â | Turbocharger air-water aftercooler |
| Configuration | Â | V |
| No. of Cylinders | Â | 8 |
| Displacement | l | 35.4 |
| Bore | mm | 170 |
| Stroke | mm | 195 |
| Compression Ratio | Â | 12:1 |
| Number of Flywheel Teeth |  | 218 |
| Flywheel House Size | Â | SAE00-18 |
| Cooling System | Â | Â |
| Coolant Capacity for Engine | l | 70 |
| Max. permissible Temperature of Cylinder Inlet | °C | 80 |
| Max. permissible Temperature of Cylinder Outlet | °C | 90 |
| Max. Coolant Warning Temperature  | °C | 93 |
| Max. Coolant Shutdown Temperature  | °C | 97 |
| Thermostat Open Temperature | °C | 71 |
| Radiator Cooling Flow  | m³/min | 750 |
| Energy Blanace | Â | Â |
| Heat dissipation (engine radiator)± 8 % | kW | 281 |
| Heat dissipation (CAC)± 8 % | kW | 48 |
| Heat dissipation (Exhaust cooled to 120°C)± 8 % | kW | 276 |
| Gas Consumption + 5 % | kW | 1383 |
| ELectrical Efficiency |  | 37.60% |
| mechanical Efficiency |  | 39.58% |
| Thermal Efficiency | Â | 40.27% |
| Total Efficiency | Â | 79.85% |
| Engine Output at genset prime output | kW | 547 |
| Fuel Consumption at 100% ofgenset prime output+ 5 % | Nm3/hr | 138.30 |
| Intake & Exhaust System(On Continuous Output) | Â | Â |
| Combustion Air Consumption | m³/min | 53.22 |
| Max. Intake Restriction | mbar | 5.0 |
| Gas Inlet Pressure Value | mbar | 20-200 |
| Gas Inlet Pressure |  | ± 10 % |
| Cylinder Max. Exhaust Temperature (before turbo) | °C | 630 |
| Max. Exhaust Temperature (after turbo) | °C | 460 |
| Min. Exhaust Back Pressure | mbar | 30.0 |
| Max. Exhaust Back Pressure | mbar | 50.0 |
| Exhaust Gas Flow  | m³/min | 133.97 |
| Exhaust Flange Diameter | mm | 1*250 |
| Emissions NOx | mg/Nm3 | < 500 |
| Engine Dimension | Â | Â |
| Length | mm | 2596 |
| Width | mm | 1459 |
| Height | mm | 1820 |
| Engine Dry Weight w/o Cooling System | kg | 3500 |
Note:
1. All engine parameters are in accordance with ISO3046, ISO8528.
2. All engine parameters are based on 25° C / 100kPa environment condition.
3. Application for Power Generation, Marine, Pump Driving, CHP power plant.
Applied gas:
Natural Gas, Biogas, City Sewage Gas, Landfill gas, Oil gas, farm biogas, Coal mine gas, etc
Acceptable fuel gas pressure: 5~12kPa
CH4 content: For natural gas≥ 85% CH4, content: For biogas≥ 40%
Gas heat value≥ 5500kcal/Nm3 (23MJ/Nm3 ). Genset output power will increase as the gas heat value increase, if use low heat value gas for fuel (Heat value<5500kcal/Nm3, it will lower the power efficiency.
Gas doesn't include free water or free materials (the size of impurities should be less than 5μ M. )
H2S content≤ 200mg/Nm³
NH3 content≤ 20mg/Nm³
Impurities content≤ 30mg/Nm³ ; Size≤ 5μ M
Water content≤ 40g/Nm³ , no free water.
Acceptable working conditions:
Ambient temperature: -10° C~+40° C
(antifreeze or preheater needed for below 0° C)
Relative humidity: <90%(20° C)
Altitude: ≤ 1000m
Normal working conditions:
Genset can run at rated power on the conditions:
Atmospheric Pressure: 100kPa, Ambient Temp: 20° C, Relative Humidity: 30%.
Standard scope of supply:
1, Gas Engine
2, AC Generator
3, Common Frame
4, Control Panel
5, Ignition System: Ignition Controller, Ignition Coils, Output harness, Pickup magnetic, Trigger disc, PolyMot high tension lead, Spark plug
6, Detonation Controller System: DetCon20 control unit, Detonation sensor, Cable & knock sensor
7, Electronic Speed Controller System: Integrated Throttle body, Vari-Step stepper motor card, Harness VariFuel, Electronic speed controller - ECON-4, pickup magnetic
8, Gas Mixer System: VariFuel air/fuel ratio mixer, VF Flange, VariStep stepper motor card, Harness VariFuel, VariFuel2 flow body
9. Emission Control System: EmCon5 control unit, EmCon5 sensor harness, knock sensor
10, Valve: Gas Pressure Valve, Solenoid Valve, Cutoff Valve
11, Exhaust Bellows & Muffler
12, Radiator for optional
Warranty:
All equipment is guaranteed for a period of 1000 hours running or 18 months from the date when the generator set has been delivered from the factory.
 50Hz 547kW Googol Genset Use Gas Electric Power Engine      Â
Â
| Engine Model | Â | JTA2160-G1A |
| Speed | rpm | 1500 |
| Frequency | Hz | 50 |
| Rating Output | Â | Â |
| Ramda Value | Â | 1.70 |
| Continuous Output | kW | 547 |
| BMEP for Continuous Output | bar | 12.38 |
| Fan Reduction | kW | 4.0 |
| Single Fan Reduction | kW | 3.6 |
| Fan Quantity | rpm | 1460 |
| Basic Performance Datasheet | Â | Â |
| Aspiration Type | Â | Turbocharger air-water aftercooler |
| Configuration | Â | V |
| No. of Cylinders | Â | 8 |
| Displacement | l | 35.4 |
| Bore | mm | 170 |
| Stroke | mm | 195 |
| Compression Ratio | Â | 12:1 |
| Number of Flywheel Teeth |  | 218 |
| Flywheel House Size | Â | SAE00-18 |
| Cooling System | Â | Â |
| Coolant Capacity for Engine | l | 70 |
| Max. permissible Temperature of Cylinder Inlet | °C | 80 |
| Max. permissible Temperature of Cylinder Outlet | °C | 90 |
| Max. Coolant Warning Temperature  | °C | 93 |
| Max. Coolant Shutdown Temperature  | °C | 97 |
| Thermostat Open Temperature | °C | 71 |
| Radiator Cooling Flow  | m³/min | 750 |
| Energy Blanace | Â | Â |
| Heat dissipation (engine radiator)± 8 % | kW | 281 |
| Heat dissipation (CAC)± 8 % | kW | 48 |
| Heat dissipation (Exhaust cooled to 120°C)± 8 % | kW | 276 |
| Gas Consumption + 5 % | kW | 1383 |
| ELectrical Efficiency |  | 37.60% |
| mechanical Efficiency |  | 39.58% |
| Thermal Efficiency | Â | 40.27% |
| Total Efficiency | Â | 79.85% |
| Engine Output at genset prime output | kW | 547 |
| Fuel Consumption at 100% ofgenset prime output+ 5 % | Nm3/hr | 138.30 |
| Intake & Exhaust System(On Continuous Output) | Â | Â |
| Combustion Air Consumption | m³/min | 53.22 |
| Max. Intake Restriction | mbar | 5.0 |
| Gas Inlet Pressure Value | mbar | 20-200 |
| Gas Inlet Pressure |  | ± 10 % |
| Cylinder Max. Exhaust Temperature (before turbo) | °C | 630 |
| Max. Exhaust Temperature (after turbo) | °C | 460 |
| Min. Exhaust Back Pressure | mbar | 30.0 |
| Max. Exhaust Back Pressure | mbar | 50.0 |
| Exhaust Gas Flow  | m³/min | 133.97 |
| Exhaust Flange Diameter | mm | 1*250 |
| Emissions NOx | mg/Nm3 | < 500 |
| Engine Dimension | Â | Â |
| Length | mm | 2596 |
| Width | mm | 1459 |
| Height | mm | 1820 |
| Engine Dry Weight w/o Cooling System | kg | 3500 |
Note:
1. All engine parameters are in accordance with ISO3046, ISO8528.
2. All engine parameters are based on 25° C / 100kPa environment condition.
3. Application for Power Generation, Marine, Pump Driving, CHP power plant.
Applied gas:
Natural Gas, Biogas, City Sewage Gas, Landfill gas, Oil gas, farm biogas, Coal mine gas, etc
Acceptable fuel gas pressure: 5~12kPa
CH4 content: For natural gas≥ 85% CH4, content: For biogas≥ 40%
Gas heat value≥ 5500kcal/Nm3 (23MJ/Nm3 ). Genset output power will increase as the gas heat value increase, if use low heat value gas for fuel (Heat value<5500kcal/Nm3, it will lower the power efficiency.
Gas doesn't include free water or free materials (the size of impurities should be less than 5μ M. )
H2S content≤ 200mg/Nm³
NH3 content≤ 20mg/Nm³
Impurities content≤ 30mg/Nm³ ; Size≤ 5μ M
Water content≤ 40g/Nm³ , no free water.
Acceptable working conditions:
Ambient temperature: -10° C~+40° C
(antifreeze or preheater needed for below 0° C)
Relative humidity: <90%(20° C)
Altitude: ≤ 1000m
Normal working conditions:
Genset can run at rated power on the conditions:
Atmospheric Pressure: 100kPa, Ambient Temp: 20° C, Relative Humidity: 30%.
Standard scope of supply:
1, Gas Engine
2, AC Generator
3, Common Frame
4, Control Panel
5, Ignition System: Ignition Controller, Ignition Coils, Output harness, Pickup magnetic, Trigger disc, PolyMot high tension lead, Spark Plug
6, Detonation Controller System: DetCon20 control unit, Detonation sensor, Cable & knock sensor
7, Electronic Speed Controller System: Integrated Throttle body, Vari-Step stepper motor card, Harness VariFuel, Electronic speed controller - ECON-4, pickup magnetic
8, Gas Mixer System: VariFuel air/fuel ratio mixer, VF Flange, VariStep stepper motor card, Harness VariFuel, VariFuel2 flow body
9. Emission Control System: EmCon5 control unit, EmCon5 sensor harness, knock sensor
10, Valve: Gas Pressure Valve, Solenoid Valve, Cutoff Valve
11, Exhaust Bellows & Muffler
12, Radiator for optional
Warranty:
All equipment is guaranteed for a period of 1000 hours running or 18 months from the date when the generator set has been delivered from the factory.
Â
Glow Plug supplier,Diesel Glow Plugs,Glow Plugs,Engine Metal Glow Plug For Isuzu Original
1D auto parts , https://www.1dauto.com