PRODUCT INFORMATION
Brief introduction:
The roll forming machines can produce various of steel roof and wall panel, it is a new building materials, the products are widely used as the roof and wall of factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre, etc. It has many advantages, such as easy installation, short building period, beauty, light weight but high strength.
The chart of Process Flow and components
Manual uncoiler- Roll forming machine- Computer control system- Hydraulic control system- Form cutter
Advantages of the roofing sheet roll forming machine
1. High efficiency
2. Lower cost
3. Long life time: 30years
4. Low energy consumption
5. PLC control, Panasonic or Siemens or eura
6. Easy operation
7. Beautiful and best quality
Â
| 1. Genaral | |
| Material: | Galvanized Coil, Aluminum |
| Material Thickness: | Â 0.3-0.5mm |
| Main roll forming machine Power: | 11 KW |
| Forming Speed: | 10-12m/min |
| Feeding width: | 229mm |
| Production line G/W: | 12.5T |
| Production line length: | about 38m |
| 2. Working Flowing | |
|
 | |
| 3. Technical Parameter | |
| 3.1 Decoiler | |
| Decoiler Type | Manual |
| Loading capacity | 3Ton, Impassive to expanding |
| 3.2 Roll Forming system with feed panel unit | |
| Axis Diameter | 50 mm |
| Forming Roller station | 36+1 groups |
| Main Axis material | First grade 45# steel,heated and quenched |
| Roller material | First grade 45# steel, Hard Chrome Coated, 2um heated and quenched |
| Pillar size | 42*45mm |
| Forming Speed | 10-12 m/min |
| Drive Type | Gear box |
| Machine Frame stand | Welded structural steel, thickness 12mm |
| 3.3 Cutting Device | |
| Cutting type | Panasonic Servo tracking cutting |
| Cutting system power | 2.2KW |
| Cutting length tolerance | ±0.5mm |
| Â | Â |
| 3.4 PU Foaming Untit | |
| PU Raw material tanks | A+B China good brand |
| Â | Â |
| Â | Â |
| 3.5 Electrical System | |
| PLC system | Japan PANASONIC/DELTA |
| Length Controller | Â Japan PANASONIC |
| Operation | Touch Screen PANASONIC/DELTA |
| Inverter | Japan PANASONIC/DELTA |
| Voltage | 380V/50Hz/3P |
Sludge Dewatering Recessed Plate Filter Press
Chamber filter press takes filter cloth as the medium to separate solid and liquid. It is a separating machine with wide rang of particle size. The filter cloth spreads in a filter board surface, it is supported by the swelling groove of filter board, when the filter board is clamped, filter cloth turns to sealing materials, and the cavity between every two filter board forms a separated filter room. During the filter processing, the materials come through the central opening into filter room, the filtrate flow by the feeding pressure, flow out of the filter board after converged. Chamber filter press can be divided into two types according to filtrate discharging ways: open channel flow and under channel flow.
Advantages:
Applications:
Sludge dewatering for wastewater treatment, Foodstuff, Chemicals,Slaughter, Animal husbandry,Pharmaceutical, Electroplating, Papermaking, Leather, Printing and dyeing, Mining, Medicine, etc
Sludge Dewatering Filter Press,Filter Press,Sludge Dewatering Plate Filter Press,Screw Filter Press,Sewage Filter Press
YIXING HOLLY TECHNOLOGY CO.,LTD. , https://www.watertreatment-machine.com