Russia Standard GOST 12820-80 Carbon Steel 09g2s Plate Flange

AEA Blind Flanges are used to seal the end of a piping system or pressure vessel openings to prevent flow. They are commonly used for pressure testing the flow of liquid or gas through a pipe or vessel. They also allow easy access to the pipe in the event that work must be done inside the line. Blind pipe flanges are often used for high pressure applications.

 




Specifications :

Flange Type:                                   
Weld Neck, Slip On, Blind, Plate, Thread, Socket Weld, Lap Joint, Ring Joint, Orifice Flange, Spectacle Blind, Paddle Spacer and Blank Flange, Figure 8 Flange, etc;
                                    
Face: Raised Face (RF),Flat Face(FF), Ring Joint (RTJ)  
                                    
Material:                                  
Carbon Steel:   Q235,20#,A105, ST37.2,C22.8, S235JR,P250GH,A350 LF1,LF2 CL1/CL2 LF3 CL1/CL2, ASTM A694 F42,F46,F48,F50,F52,F56,F60,F65,F70
Stainless Steel: A182 F304/304L, F316/316L, F316H,F316Ti,F321,F44(UNS S31254)
Ally Steel:          A182 F1,F5/a,F9,F11,F12,F22,F91  
Duplex Steel:    A182 F51/UNS S31803,F53/UNS S32750 F55/UNS S3260
Special Alloy:   ,C95400,C95500,C95800,Monel400,Inconel 600, Inconel 625, Inconel 800, Inconel 825
                                    
Standard:                                
ASME: ANSI/ASME B 16.5,ASME B16.36,ASME B16.47 Series A(MSS SP-44);ASME B16.47 Series B(API 605),AWWA C207
DIN:          Plate(DIN2573,2576,2502),Blind(DIN2527),Loose(DIN2641-2676),Welding-Neck (DIN2627-2638), Threaded (DIN2565 2566 2567) ,Slip-On (DIN86029 86030)
EN:  EN1092-1                           
JIS:  JIS B2220                          
UNI:          UNI2253-2278,UNI6083,UNI6084,UNI2280,UNI2281-2286, UNI6091-6097
GOST: GOST12820-80, GOST12821-80 
BS: BS 4504,BS10-1962,BS3293-1960 
                                    
Pressure:                                 
ANSI:Class 75, Class 150, Class 300, Class 600, Class 900, Class 1500, Class 2500
DIN:PN 6,PN 10,PN 16,PN 25,PN 40                 
EN:PN 6,PN 10,PN 16,PN 25,PN 40               
JIS:1K,2K,5K,10K,16K,20K,30K,40K,63K ;                  
GOST:PN 6,PN 10,PN 16,PN 25,PN 40,PN63,PN100,PN160                   
BS:TABLE D E                                    

 Machining Tolerance:  From 0.005mm-0.01mm-0.1mm As Standard.

Machined Surface Quality: Ra 0.8-Ra3.2 according to customer requirements

Production Process:
Forging-Heat Treatment-Machining (rough machining and finish machining)-Drilling-Inspect-Stamp-Packing

Heat Treatment: Solution, N+T (Normalizing + Tempering), Q+T (Quenching + Tempering)


Surface Treatment                
Anti-rust Oil, Transparent/Yellow/Black Anti-rust Paint,Zinc,Hot dipped Galvanized.                                   
Usage: 
Oil Field, Offshore, Water System, Shipbuilding, Natural Gas, Electric Power, Pipe Projects etc.