- Model NO.: 2RB
- Material: Aluminium
- Trademark: greentech
- Origin: China
- Color: Silver
- Drive: Motor
- Specification: 2RB
- HS Code: 84148090
The impellers in the G_series machines are mounted directly on the motor shaft for noncontact compression entirely without friction. Maximum operational reliability, even at high differential pressures. Is ensured by the arrangement of the bearings outside the compression chamber.
The gas it taken in through the inlet. As it enters the side channel, the rotating impeller. Imparts velocity to the gas in the direction of rotation. Centrifugal force in the imp eller blades accelerates the gas outward and the pressure increase. Every rotation adds kinetic energy. Resulting in the further increase of the pressure along the side channel. The side channel narrow at the rotor, sweeping the gas off the impeller blades and discharging it through the outlet silencer where it exits the side channel blower.
Features:
Die-cast aluminum alloy housing.
Both 50Hz and 60Hz available.
Dual-usage: Compressor and Vacuum (suction and blow).
Electronic motor with IP55 protection and Insulation class H.
No oily odors.
Low noise and libration.
Maintenance-free.
Series Steel Structure Industrial Cooling Tower
Tower structure: all steel structure, tower skeleton, cloth water system, climbing ladders, guardrails are Q235-B material, anti-corrosion using hot-dip galvanizing, surround panel for glass Glass steel.
Windpipe: kinetic energy recovery type, air flow organization is reasonable, high efficiency;
Fan: Wing-type adjustable cooling tower dedicated shaft fan, blades are aluminum alloy or glass steel.Motors,
gearboxes: YE2 series outdoor energy-efficient energy-saving motors, protection class IP55, insulation class F-class.
Filler: modified PVC raw material thin belly filler, high temperature, aging, flame retardant, bonding into a block strength.
Water receiver: the use of high-efficiency low-resistance rib arc water receiver, modified PVC material pull squeeze molding, water collection effect is significant, the drift rate is less than 0.01%.The fan system tower is equipped with motors, gearboxes, fan access platforms and passageways, and there are climbing ladders and guardrails outside the tower.
Pool: This tower's pool and foundation, pre-buried steel plate, etc. by the user is responsible for, the water level should be controlled at -0.25-0.3m as well.
Applied to petroleum, chemical, metallurgy, medicine, electricity and other industrial large water circulation system.
Series Steel Structure Industrial Cooling Tower,Industrial Water Cooling Tower,Industrial Cooling Tower,Mechanical Cooling Tower
Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.arkfluid.com