Weichai Deutz Mwm226 Air Filter (13060625+0619)

These are some of the parts for deutz mwm 226 we can offer , meanwhile for generator set, water pump set, agricultural tractors, special vehicles, etc, manufactured by former
Deutz joint venture in China. We also sell other Deutz models, including 912/913
series, 1015 series, 413/513 series, 1013/2012 series, 226B series,TBD234 series,
TBD620 series, etc.
Besides, we also sell other brands, including Cummins, VM, CAT, Isuzu,
Toyota, Nissan, Toyota, Yuchai, Weichai, Changchai, etc, complete engines and Spare Parts,
Including cylinder head, cylinder block, main bearing, conrod bearing, alternator, starter motor,
Piston, piston ring, conrod, cylinder head gasket, oil seal, seal O ring, crankshaft, camshaft,
Timing gear, etc.

 
These are some of the parts for deutz mwm 226 we can offer , meanwhile for generator set, water pump set, agricultural tractors, special vehicles, etc, manufactured by former
Deutz joint venture in China. We also sell other Deutz models, including 912/913
series, 1015 series, 413/513 series, 1013/2012 series, 226B series,TBD234 series,
TBD620 series, etc.
Besides, we also sell other brands, including Cummins, VM, CAT, Isuzu,
Toyota, Nissan, Toyota, Yuchai, Weichai, Changchai, etc, complete engines and spare parts,
Including cylinder head, cylinder block, main bearing, conrod bearing, alternator, starter motor,
Piston, piston ring, conrod, cylinder head gasket, oil seal, seal O ring, crankshaft, camshaft,
Timing gear, etc.

 

A Split Hopper Barge (SHB) is a vessel with a large open hold, used to load and transport dredged material. The Barge is loaded by a Cutter Suction Dredger or by a Backhoe Dredger. The barge is self-propelled, and sails to the deposit area, where it unloads the soil. The vessel consists of two halves, and unloading is done by opening, or `splitting`, the two halves, and depositing the soil on the seabed.

A hopper barge is a kind of non-mechanical ship or vessel that cannot move around by itself, unlike some other types of barges, that is designed to carry materials, like rocks, sand, soil and rubbish, for dumping into the ocean, a river or lake for land reclamation.Hopper barges are seen in two distinctive types; raked hopper or box hopper barges. The raked hopper barges move faster than the box hoppers; they are both designed for movement of dry bulky commodities.

Photo of our Split Hopper Barge:

There are several "hoppers" or compartments between the fore and aft bulkhead of the barge. On the bottom of the barge hull, there is (are) also a large "hopper door(s)", opening downwards. The doors are closed while the vessel is moving, so she can carry the materials that are to be dumped. The door(s) open when the ship has arrived at the spot where the materials are to be dumped.

Split barges serve the same purpose, but instead of a door in the hull's bottom, the hull of the whole barge splits longitudinally between the end bulkheads. The vessel consists of two major parts (port and starboard halves), both are mostly symmetrical in design. Both parts of the vessel are hinged at the deck and operated by hydraulic cylinders. When the vessel splits the load is dumped rapidly, which means the barge has to be very stable in order not to capsize or otherwise get damaged.

Split Hopper Barge

Self Propelled Barge,Floating Barge,Tug And Barge,Jack Up Barge

Unisite Group Ltd. , https://www.shipsparts.nl