This report comes from John Tulipano:
A vehicle crashed into a commercial building at 1525 Kautz, located on the western edge of DuPage Airport. The driver was later seen walking along Kautz Road. Upon arrival, first responders found the car had penetrated 20 feet into the structure. All gas meters had been sheared off, and the attic was filled with gas. Due to the hazardous situation, exterior operations were immediately set up while crews waited several hours for Nicor to locate and shut off the main gas line. A special call was made for the MABAS Division 10 MVU from Lyons to assist with the incident.
http://tulipano-firephotos.smugmug.com/FIRES/2015-Fires/5-10-15-West-Chicago-Car-into-Bl/
![ARFF on standby]()
John Tulipano photo
![Pierce tower ladder flowing water]()
John Tulipano photo
![fire engine with hose connected to a hydrant]()
John Tulipano photo
![view from ARFF windshield]()
John Tulipano photo
![mobile ventilation unit]()
John Tulipano photo
The incident highlighted the importance of quick response and coordination between agencies. Firefighters worked carefully to ensure the safety of both the public and emergency personnel. The scene was clearly dangerous, and the presence of gas in the building required extreme caution. Thanks to the efforts of all involved, no injuries were reported. The photos provide a visual look at the scene and the equipment used during the operation.
Honing Tube
A honed tube refers to a precision steel tube whose inner bore has been processed by the honing technique, achieving high dimensional accuracy, high form accuracy, low surface roughness, and featuring a cross-hatched pattern. Its primary application is in manufacturing hydraulic cylinder barrels and pneumatic cylinder barrels. These tubes are key components ensuring high performance, high reliability, and long service life in hydraulic and pneumatic systems. When the term "honed tube" is used in the hydraulic industry, it typically refers to the finished tube that has undergone honing processing and is ready for direct use in manufacturing cylinder barrels.
honing ,inner bore, high performance
Shandong Shifeng Metal Products Co., Ltd. , https://www.qfgygs.com