Applicable to general sewing of knit wear, sports wear and leisure suits. FX600-02BB
Applicable to knit wear, under wear, T-shirt etc, for light and medium materials.
Characteristics:
1)This machine is with tape-binding device, suitable for T-shirt, under ware etc.
2)Due to various size and specification, please make clear the size of entrance and exit of the folder. (standard size 3/8")
3)New type needle bar oil-back system, no possibility of oil leakage.
4)Needle bar transmission structure, adopt all-sealed design, more safe and easier to keep clean.
5)Complete automatic supply system and oil-filter device, ensure the max sewing speed to be 6000r. P. M.
6)The circumference of sewing body is just 280mm, suitable for some small round parts such as collar and sleeve etc.
Remark: Can be equipped with the direct drive equipment.
Please equipped the rear puller, when sewing the blanket and super heavy materials
The replacement process of excavator hydraulic cylinder is as follows:
1. Turn off the hydraulic system: Before replacing the hydraulic cylinder, it is necessary to turn off the system to avoid liquid leakage in the hydraulic system.
2. Disassembling the hydraulic cylinder: Disassembling the hydraulic cylinder requires the use of tools such as wrenches, screwdrivers, etc. Firstly, the hydraulic pipeline needs to be removed, and then the bolts of the hydraulic cylinder need to be removed to remove the hydraulic cylinder from the machine.
3. Check the hydraulic cylinder: Check if there is any damage to the hydraulic cylinder, and if there is any damage, replace it.
4. Install a new hydraulic cylinder: Install the new hydraulic cylinder onto the machine and secure the cylinder with bolts.
5. Connect hydraulic pipeline: Connect the hydraulic pipeline to the hydraulic cylinder, pay attention to the position and direction of the connection, and ensure that the connection is secure.
6. Test system: after replacing the hydraulic cylinder, it is necessary to test whether the system operates normally, check whether the hydraulic cylinder operates normally, and deal with any problem in time.
7. Cleaning work: Clean the liquid and debris in the hydraulic system to ensure that the system is clean and avoid any impact on the system.
For Kato Cylinder Seal Kit,For Kato Center Joint Seal Kit,Center Joint Seal Kit,Repair Kit For Kato Joystick
Safe Seal Technology Co., Ltd. , https://www.jolseals.com