High Sensitivity Archway Metal Detector Jh-33z

Archway Metal Detector JH-33Z

Features:

Easy assenbly
JH-33Z, 33ZONE Modular design allows for a quick and easy assembly, only 4 screws to mount it.
Pinpoint detection zones
There are 33 distinct pinpont detection zones for full target coverage on the left, centre and right side of the body from head to toe
Traffic lights
On the entrance of the archway, there traffic light to remind you the detector is ready for passenger.
Audible and visual alarms
There is audible alarm and visual LED lights signal when a target has been detected, the pinpoint lights on the exit gatepost will show the location of any offending object.
Touchpad controls
The accesss control panel is designed for use by authorized personnel with specific, multi-level security codes. It allows authorized users to change settings.

Self-test
No battery is required for memory retention. While the unit is in operation, a self-test is performed, any failures or problems will be immediately reported on the LCD display

Specifications
1). Operating temperatures
-20`C to +70`C; Humidity: To 95% non-condensing
2). Power fully automatic 100 to 240VAC, 50 or 60 hertz, 5watts; No rewiring, switching or adjustments required
3). Weatherproofing/foreign object protection standards
Meet IP55, IEC standard.
4). Traffic counter
Counter count the number of passenger that have passed through the detector, the number of alarms and caculates arlarm percentage
5). Synchronization
Dual channels and DSP circuity allow several JH-33Z's to operate simultaneously in close proximity to another
6). Programmes
Sixteen(16)independent programs designed to meet all installation-specific requirements
7). Alarms
Audible tone and volume adjustable. Bright LED vusual alarm
8). Target pinpoint lights
Thirty-three distinct zones are displayed with two independent columns of LED' located on exit side of the gate

Dimensions
Overall sizes(cm): 224(height)x90(width)x58(depth)
Size of alley(cm): 224(height)x76(width)x58(depth)
Net Weight: 68kg
Shipping size(cm): 227x73x22 (side panel ) 80 x 59 x28cm (control box)
Shipping weight: 90kg. Archway Metal Detector JH-33Z

Features:

Easy assenbly
JH-33Z, 33ZONE Modular design allows for a quick and easy assembly, only 4 screws to mount it.
Pinpoint detection zones
There are 33 distinct pinpont detection zones for full target coverage on the left, centre and right side of the body from head to toe
Traffic lights
On the entrance of the archway, there traffic light to remind you the detector is ready for passenger.
Audible and visual alarms
There is audible alarm and visual LED lights signal when a target has been detected, the pinpoint lights on the exit gatepost will show the location of any offending object.
Touchpad controls
The accesss control panel is designed for use by authorized personnel with specific, multi-level security codes. It allows authorized users to change settings.

Self-test
No battery is required for memory retention. While the unit is in operation, a self-test is performed, any failures or problems will be immediately reported on the LCD display

Specifications
1). Operating temperatures
-20`C to +70`C; Humidity: To 95% non-condensing
2). Power fully automatic 100 to 240VAC, 50 or 60 hertz, 5watts; No rewiring, switching or adjustments required
3). Weatherproofing/foreign object protection standards
Meet IP55, IEC standard.
4). Traffic counter
Counter count the number of passenger that have passed through the detector, the number of alarms and caculates arlarm percentage
5). Synchronization
Dual channels and DSP circuity allow several JH-33Z's to operate simultaneously in close proximity to another
6). Programmes
Sixteen(16)independent programs designed to meet all installation-specific requirements
7). Alarms
Audible tone and volume adjustable. Bright LED vusual alarm
8). Target pinpoint lights
Thirty-three distinct zones are displayed with two independent columns of LED' located on exit side of the gate

Dimensions
Overall sizes(cm): 224(height)x90(width)x58(depth)
Size of alley(cm): 224(height)x76(width)x58(depth)
Net Weight: 68kg
Shipping size(cm): 227x73x22 (side panel ) 80 x 59 x28cm (control box)
Shipping weight: 90kg.

Atmospheric Desorption Electrolysis

Gold-loaded carbon normal pressure and same temperature desorption electrolysis complete equipment is used for the desorption and electrolysis of gold-loaded carbon.

1. High gold desorption rate: the carbon-poor gold grade after desorption is less than or equal to 80g/t (the products in the same industry are generally less than or equal to 100g/t).

2. High primary electrolysis rate: the average electrolysis rate of desorption solution is ≥90%. (The products in the same industry are generally around 70%).

3. Accurate gold balance: the actual amount of gold obtained after desorption and electrolysis is consistent with the theoretical gold content in the gold-loaded carbon. (Products in the same industry generally have the phenomenon of "floating gold or accumulative funds", which causes the loss of gold in the processing process and makes the amount of gold unbalanced)

4. Efficient and easy to operate: The whole set of equipment adopts integrated design, signal acquisition, operation adjustment control and safety protection are automated to ensure high efficiency, easy operation, safety and reliability during the entire operation period.

Atmospheric Desorption Electrolysis,gold extraction machine,Desorption Electrolysis Device,Gold Ore Electrowinning

Changchun Gold Research Institute Co.LTD , https://www.changchunmachine.com