Customized: Non-Customized
Condition: New
Warranty: >2 Year
Mold Change: 5 Mintues
Speed: 10000-25000per Hour
Capsule Size: 000#,00L#,00#,0#,1#,2#,3#,4#
Material: Powder or Pellets
Trademark: Ruian
Transport Package: Wooden Package Case
Specification: 1140*700*1630MM
Origin: Ruian
HS Code: 8422400000
 CGN208-D type capsule filling machine is a new efficient equipment based on DTJ-C model (old type) after research and development: easier more intuitive and higher loading in capsule dropping, U-turning, vacuum separation in comparison with the old type. The new type of capsule orientating adopts columns pill positioning design, which shortens the time in the replacement of mould from the original 30 minutes to 5-8 minutes. This machine is one type of electricity and pneumatic combined control, automatic counting electronics, programmable controller and frequency conversion speed regulating device. Instead of manual filling, it reduces labor intensity, which is the ideal equipment for capsule filling for small and medium-sized pharmaceutical companies, pharmaceutical research and development institutions and hospital preparation room.
Product Prameters
| Adjust new mould time: | 5-8 minutes (for beginner) |
| Production capacity: | 10000-25000 capsules/hour (depends on the capsule size) |
| Suitable capsule: | 000#,00L#,00#,0L#,0#,1#,2#,3#,4#,5# mechanical made standard capsule. |
| Filled material: | Powder (without wet or sticky); granules. |
| Total power: | 2.12KW |
| Compressed air: | 0.03m 3 /min, 0.7Mpa |
| Vacuum pump: | Exhaust 40m 3 /h |
| Overall dimension: | 1200*700*1650mm |
| Packing dimension: | 1650*800*1750mm |
| Gross Weight: | 420 KGS |
The types of rigging
The ability to safely move materials from one location to another is a vital part of many activities at Princeton. Hoists are often used when materials are too heavy or bulky to be safely moved manually. Because hoists rely upon slings to hold their suspended loads, slings are the most commonly used materials-handling apparatus.
Slings, chokers, shackles and hoists are are available in many different materials and styles. Slings are commonly used in combination with a lifting device, such as an overhead crane, hoist, or forklift. The four main types of slings are:
- Wire Rope: The most commonly used sling. Used in the construction and other applications where heavy loads and rugged conditions exist.
- Chain: Combines superior strength, ease of handling and durability. The combination of heavy loads, elevated working temperatures and severe lift conditions usually dictate that an alloy chain sling be used.
- Mesh: Wire and Chain. Excellent in lifting objects that are hot or have sharp edges, such as bar stock or plate steel. Mesh slings usually have wide load bearing surfaces that greatly enhance load balancing. Machine shops and steel warehouses typically have applications requiring mesh slings.
- Synthetic: Both web and round-slings are used where loads must be protected from damage. Their light weight and flexibility reduce fatigue and strain on the rigger.
The sections below serve as a guideline when hoisting or rigging at Princeton University.
Stamping Thimble,Wire Rope Thimble,Drop Forged Shackle,Alloy Steel Shackle
Hebei Liston Lifting Rigging Manufacturing Co., Ltd. , https://www.liftingriggingfactory.com