The morning temperatures in winter are low, and sometimes even drop below 0°C. At this time, after the sprinkler passes, the water left on the road will freeze and form a long ice belt. If it is not careful, the cyclist will fall. "I did not expect the road to be frozen. The car fell down after it slipped. Today, the back is still aching." Yesterday, Xinchang reader Ms. Lu scored an evening report hotline 88843111 to tell her story.
The day when Ms. Lu fell was December 25. Ms. Lu remembered very clearly that the weather forecast for that day stated that the minimum temperature in Xinchang would drop to -2°C. Around 7 am that morning, Ms. Lo rode her electric vehicle and headed west along the People's Middle Road in Xinchang, rushing to work. When passing near the county government building, the car suddenly began to slip. Finally, Ms. Lu took her car and fell to the ground. “At that time, there was a good-hearted person on the roadside. When I saw that I fell, I came to help me. I just stood firmly and heard a bang, and someone fell behind, and the good-hearted man hurried to help the other person. "Ms. Lu said that because of this fall, the electric car broke, she could only push the car to repair the shop, and then walked to work.
"I didn't think the water on the road was frozen!" Ms. Lu told the reporter, "When I got to the unit, I only heard that many people fell down that morning."
The reporter searched and found that there were several posts on the forum about road freezing. "Because the ground is too slippery to fall and fall, not only the electric car broke, but the most serious is the loss of a front tooth." Netizens named "Yoha Hip-Hop" also encountered the same thing. Netizens "for the people" said: "Nanchang Nanming Road slipped more and more cars today, but also caused traffic jams. One of the electric cars slipped and fell more than 20 meters, scaring people."
"As soon as the temperature is low, the sprinkled water will freeze. Can a sprinkler not sprinkle water on the street in the early morning?" Ms. Lu could not help but ask. She told reporters that afterwards, she called to ask the county sanitation department.
The other party told her that the reason why it was necessary to sprinkle water was to reduce dust, and the second was to flush garbage from the street to both sides of the road. This would make it easier for sanitation workers to clean up. "We can understand this, but I think we must also think about the safety of the public. Therefore, I think when the temperature is low in winter, can the sprinklers not spill or wait until the temperature rises before they hit the road?" Ms. Lu proposed.
In response to comments from citizens and netizens, the reporter contacted Yang Xiaojun, secretary of the Party Branch of the Sanitation Department of Xinchang County. He told reporters that they have proposed corrective measures: “According to the situation on that day, we also specifically contacted the traffic police brigade. According to their suggestions, in the future, if the temperature is below 0°C, the morning sprinkler will stop operations and change it to noon. Spray water from 12 to 3 pm and avoid the dark side of the north and south facing the streets to prevent ice formation.†Yang Xiaojun told reporters that before they actually looked at the weather forecast every day, they adjusted the watering time according to the weather, but they did not expect it. Xinchang’s temperature will drop below 0°C on that day. “We have already contacted the meteorological department and set up an electronic display so that the sprinkler driver can see the temperature at any time and adjust the time for spraying.â€
Our FRP Pressure Tanks are designed to store and distribute water under pressure, making them ideal for residential, commercial, and industrial water treatment applications. They are made from high-quality FRP (Fiberglass Reinforced Plastic) material, which is known for its durability and corrosion resistance.
Our FRP Membrane Housings are specifically designed to accommodate RO (Reverse Osmosis) membrane elements. These housings are available in three different sizes: 2.5 inch, 4 inch, and 8 inch. The 2.5 inch housing can withstand working pressures of 300PSI and 1000PSI, the 4 inch housings can handle working pressures ranging from 300PSI to 1200PSI, the 8Inch housings can handle working pressures ranging from 300PSI to 2000PSI.
Our FRP membrane housings are available in two different brands: Winder and Winder-G. Both brands have undergone rigorous testing and have been certified by ISO9001, CE, and NSF. This ensures that our products meet the highest quality standards and can be trusted for reliable performance. Our FRP membrane housings have been subjected to extensive testing, including more than 100,000 fatigue tests and 6 times the bursting water pressure tests. This ensures that our housings can withstand the harshest operating conditions and provide long-lasting performance.
The standard color of our FRP membrane housings is white, but we can also provide custom colors upon request. This allows our customers to match the aesthetics of their water treatment systems or integrate them seamlessly into their existing setups.
Frp Membrane Housing,Frp Ro Membrane Housing,Ro Membrane Housing,Ro System Membrane Housing
Hebei Chengda Water Technology Co.,Ltd. , https://www.arclionchengda.com