With the improvement of technology, thermal shock chambers of the technology also has a very good improvement, but even the best equipment, you will not care, but how long do? This problem is very clear to everyone. Therefore, learning the relative maintenance measures , the benefits to the equipment, and the benefits to us are also numerous. Teddy chapter tells the story of your company for maintenance of hot and cold impact test chamber:
  2, condenser dust removal of high and low temperature impact tester The condenser is best to maintain regularly on a monthly basis, and to use high-pressure air to spray dust or use a vacuum cleaner to remove the dust attached to the condenser cooling network clean;
4. When the test cloth surface of the device is not clean or hardened, the wet ball test cloth of the device needs to be replaced. Or after the temperature control is finished, if you want to continue to do temperature and humidity sphericity control, you must replace the test cloth before use. (The test cloth is replaced every three months. After the replacement, the temperature measuring body is wiped with a clean cloth. The new test cloth should be cleaned first)
3. Check the wet bulb water level of the equipment and adjust the water level of the water accumulation drum. The water level of the water accumulation drum may not be too high. Otherwise, the water will overflow the water collection drum or the water level is too low to make the wet bulb test cloth absorb water abnormally. Should keep six minutes full. (To adjust the water level of the water trap, adjust the height of the water trap.)
1. Humidifier inspection and maintenance of the high-low temperature impact test box The best way to store the water in the humidifier is to change it every month, and ensure that the cleanliness of the water is up to the target and the water is smooth;
    Â
   A good device needs a good maintenance measure. Therefore, when using the high-low temperature impact test box, the operator must maintain it well so that its service life can be extended and the performance can be more stable.
Tower Crane spare parts refer to the components and accessories that are used to replace damaged or worn-out parts of a tower crane. Some common tower crane spare parts include:
1. Hoist motors: These are used to lift and lower heavy loads in a tower crane.
2. Slewing motors: These motors are responsible for rotating the tower crane.
3. Wire ropes: Wire ropes are used for lifting and lowering loads in a tower crane.
4. Safety devices: These include limit switches, load moment indicators, and anti-collision systems, which ensure safe operation of the tower crane.
5. Control panels: These panels include buttons, switches, and control systems that allow operators to control the movements of the tower crane.
6. Hydraulic pumps and cylinders: These components are used to control the movement of the tower crane's jib and trolley.
7. Electrical components: These include circuit breakers, contactors, relays, and fuses, which are essential for the electrical functioning of the tower crane.
8. Bearings: Bearings are used to reduce friction and facilitate smooth movement of various parts in the tower crane.
9. Brakes: Tower cranes are equipped with various types of brakes, including hoist brakes, slewing brakes, and trolley brakes, which help in controlling the movement of the crane.
10. Ladders and platforms: These are used for accessing different parts of the tower crane for maintenance and repair purposes.
Tower crane spare parts are essential for ensuring the smooth operation and maintenance of tower cranes, as they help in replacing worn-out or damaged components and ensuring the safety and efficiency of the crane.
Luffing Tower Crane Parts,L46A1 Mast Section,Crane Fixing Angle,Tower Crane Collar Frame,Tower Crane Parts List
SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sczenghui.com