Model NO.: NPT
Origin: Ningbo, China
HS Code: 847989
Model NO.: NPT
Origin: Ningbo, China
HS Code: 847989
 Product Name: NTP Pneumatic Repeatedly Type VibratorÂ
1. Linear vibration
2. Nominal frequency from 1.328/min to 8.784/min
3. Centrifugal force from 190 N to 2.039 N
4. Frequency and amplitude are adjustable separately
5. Available in ATEX compliant or in stainless steel
Applications
The pneumatic piston vibrators series NTP are especially suitable for knocking off material adhering to container walls in funnels, containers, silos and hoppers. They can be used as drives for vibrating tables and chutes and as assitance for emptying containers.
Special features of NTP vibrators are: impacts like a rubber hammer or vibration with high peak acceleration.
Design and functioning principle
The vibration (linear) is produced by a freely vibrating differential pressure piston. In the standard version B+C the piston is knocking against an elastomer impact plate and works like a rubber hammer. In the version B without impact plate the piston works against an air cushion (noise reduced).
Hard knocking versions available.
The frequency can be adjusted by varying the pressure of the air supply and the amplitude by throttling the exhaust.
For operation a control valve is required (not included in scope of delivery).
Lubricationfree operation is possible in compliance with the recommendations of Netter.
ATEX compliant linear vibrators of the NTP series and units with stainless steel housing are available.
Permissible operating conditions
Drive medium: Compressed air or nitrogen (Filter ≤ 5 μm), preferably with oil mist
Operating pressure: 2 bar to 6 bar
Ambient temperature: 5oC to 60'C
2. Nominal frequency from 1.328/min to 8.784/min
3. Centrifugal force from 190 N to 2.039 N
4. Frequency and amplitude are adjustable separately
5. Available in ATEX compliant or in stainless steel
Applications
The pneumatic piston vibrators series NTP are especially suitable for knocking off material adhering to container walls in funnels, containers, silos and hoppers. They can be used as drives for vibrating tables and chutes and as assitance for emptying containers.
Special features of NTP vibrators are: impacts like a rubber hammer or vibration with high peak acceleration.
Design and functioning principle
The vibration (linear) is produced by a freely vibrating differential pressure piston. In the standard version B+C the piston is knocking against an elastomer impact plate and works like a rubber hammer. In the version B without impact plate the piston works against an air cushion (noise reduced).
Hard knocking versions available.
The frequency can be adjusted by varying the pressure of the air supply and the amplitude by throttling the exhaust.
For operation a control valve is required (not included in scope of delivery).
Lubricationfree operation is possible in compliance with the recommendations of Netter.
ATEX compliant linear vibrators of the NTP series and units with stainless steel housing are available.
Permissible operating conditions
Drive medium: Compressed air or nitrogen (Filter ≤ 5 μm), preferably with oil mist
Operating pressure: 2 bar to 6 bar
Ambient temperature: 5oC to 60'C
Â
 Â
Shipment
1: Usually we ship your order by sea or by air...
2: We do our best to ship your order in 2 week after receive your payment
3: We'll tell you the tracking number once your order has been sent.
4.100%  one by one tested.
5. MOQ: 5 pcs, small order is available in the first business
6. Payment: T/T,  WEST UNION
7. Welcome OEM designs and manufactureÂ
8. Delivery: By air, by sea, by express such as DHL, TNT or EMS etc, deliver time 5-15 days
Why choose us
1: Various style for completely series pneumatic products for you to choose
2: High quality with competitive price
3: Sample order & small quantity order is ok
4: Provide free products information.
5.Reliable quality assured and active after-sell serviceÂ
brand packages:
1.with our brand SUPERMECHÂ in products and boxes Â
2. with blank brand no logo
3. with client logo
  Product Name: NTP Pneumatic Repeatedly Type Vibrator
Â
1. Linear vibration
2. Nominal frequency from 1.328/min to 8.784/min
3. Centrifugal force from 190 N to 2.039 N
4. Frequency and amplitude are adjustable separately
5. Available in ATEX compliant or in stainless steel
Applications
The pneumatic piston vibrators series NTP are especially suitable for knocking off material adhering to container walls in funnels, containers, silos and hoppers. They can be used as drives for vibrating tables and chutes and as assitance for emptying containers.
Special features of NTP vibrators are: impacts like a rubber hammer or vibration with high peak acceleration.
Design and functioning principle
The vibration (linear) is produced by a freely vibrating differential pressure piston. In the standard version B+C the piston is knocking against an elastomer impact plate and works like a rubber hammer. In the version B without impact plate the piston works against an air cushion (noise reduced).
Hard knocking versions available.
The frequency can be adjusted by varying the pressure of the air supply and the amplitude by throttling the exhaust.
For operation a control valve is required (not included in scope of delivery).
Lubricationfree operation is possible in compliance with the recommendations of Netter.
ATEX compliant linear vibrators of the NTP series and units with stainless steel housing are available.
Permissible operating conditions
Drive medium: Compressed air or nitrogen (Filter ≤ 5 μm), preferably with oil mist
Operating pressure: 2 bar to 6 bar
Ambient temperature: 5oC to 60'C
2. Nominal frequency from 1.328/min to 8.784/min
3. Centrifugal force from 190 N to 2.039 N
4. Frequency and amplitude are adjustable separately
5. Available in ATEX compliant or in stainless steel
Applications
The pneumatic piston vibrators series NTP are especially suitable for knocking off material adhering to container walls in funnels, containers, silos and hoppers. They can be used as drives for vibrating tables and chutes and as assitance for emptying containers.
Special features of NTP vibrators are: impacts like a rubber hammer or vibration with high peak acceleration.
Design and functioning principle
The vibration (linear) is produced by a freely vibrating differential pressure piston. In the standard version B+C the piston is knocking against an elastomer impact plate and works like a rubber hammer. In the version B without impact plate the piston works against an air cushion (noise reduced).
Hard knocking versions available.
The frequency can be adjusted by varying the pressure of the air supply and the amplitude by throttling the exhaust.
For operation a control valve is required (not included in scope of delivery).
Lubricationfree operation is possible in compliance with the recommendations of Netter.
ATEX compliant linear vibrators of the NTP series and units with stainless steel housing are available.
Permissible operating conditions
Drive medium: Compressed air or nitrogen (Filter ≤ 5 μm), preferably with oil mist
Operating pressure: 2 bar to 6 bar
Ambient temperature: 5oC to 60'C
Â
 Â
Shipment
1: Usually we ship your order by sea or by air...
2: We do our best to ship your order in 2 week after receive your payment
3: We'll tell you the tracking number once your order has been sent.
4.100%  one by one tested.
5. MOQ: 5 pcs, small order is available in the first business
6. Payment: T/T,  WEST UNION
7. Welcome OEM designs and manufactureÂ
8. Delivery: By air, by sea, by express such as DHL, TNT or EMS etc, deliver time 5-15 days
Why choose us
1: Various style for completely series pneumatic products for you to choose
2: High quality with competitive price
3: Sample order & small quantity order is ok
4: Provide free products information.
5.Reliable quality assured and active after-sell serviceÂ
brand packages:
1.with our brand SUPERMECHÂ in products and boxes Â
2. with blank brand no logo
3. with client logo
Â
For copper scraps, whether it's turnings, chips, filings, shavings, cuttings, sawdust, drillings, borings, debris, granules or sludge, Ecohydraulic copper recycling machine can help. If your scraps are small chips, you can choose our Copper Briquette Machine to press your chips to be small blocks. If your scraps are shavings or turnings, you can choose our Copper Baler to press your chips to be square bales, if your scraps are big like pipe tube sheet plate rebar, etc., you can choose our copper shear to cut your scraps to be smaller pieces.
Bronze Recycling Machine, Brass Recycling Machine, Copper Scraps Recycling Machine, Copper Chips Recycling Machine, Waste Copper Recycling Machine
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.yjhydraulicn.com