PET Blow Molding Machine

About
QCL-12III Semi-automatic blow molding machine With microcomputer controlling system, it controls various technical parameter needed more accurately and more steadily. Suitable for CO2 bottle, mineral water bottle, pharmaceutical bottle, oil bottle, cosmetic bottle, hot filling bottle.

Different system
1.blowing and Pneumatic system: Simple operation and high control precision, bottle blow unit is equipped with specially designed PLC controlsystem. It controls the whole bottle production process through a soft touch pad with time control precision up to 0.01 second; Pneumatic unit provides power for machine movements including machine driving and bottle blowing. QCL-12IV-2 is equipped with world famous brand components (Festo or SMC) to reduce the noise, save energy and produce the high quality bottles.

2.Clamping system:this adopts three-plate toggle clamping system to provide powerful clamping force required by high pressure blowing up to 35 bars. Besides, the system has an adjustment device to change the distance between front & middle mold-plate and the position of stretch-seal cylinder required in different mold installation

3.Heating system:QCL-12 series preform heater adopts infrared lamp as heating unit. Infrared has powerful thermal-radiation capacity, which can heat up preform to required temperature in a very short time, while the strong thermal-penetrability provides continuous and uniform heating inside of preform and on surface of the preform, and also adopts independent temperature control unit for each heating zone to offer ideal temperature for various preform. Each heating lamp has a voltage regulator to control the voltage of the heating lamps and keep it working smoothly. With the LED display, it becomes easy and convenient to inspect and adjust the voltage value.

4.Safety system: In order to keep both machine and operator safe, this machine installs twin startup switches on two sides of the machine, which should be pressed at the same time to start the machine, while there is also an emergency stop button on the machine to stop machine urgently if necessary.

Famous features
1.Advanced PLC control system with a use-friendly panel and time-control precision of PLC up to 0.01second

2.Equipped with special designed air storage unit ;Using Infrared preform heater.

3.Independent Temperature Control for different heating lamp to get ideal preform heating results; Heating lamps are adjustable in directions to suit various preforms

Parametric Technology

Force of Closing Mould	80KN
Productive capacity	Two cavities 800PCS,one cavity 400PCS/H
Max.Bottle Containment	Two cavities 50ML-1.5L,one cavity 1.5L-3L
Working Air Pressure of Mainframe	0.8MPa
Blowing Air Pressure	0.1-3.0MPa
Heaing Capacity	7.5KW
Max.Stretch Length	350mm
Max.Mould Thickness	200mm
Allowed Mould Thickness	120-230mm
Allowed Mould Width	400mm
Distance Between Two Mould Centres	100-200mm
Weight	500+200kg
Size of Main Frame (L.W.H.)	1500×650×1700mm
Size of Oven (L.W.H.)	1400×680×1350mm