1 Carrier flotation process makes it possible to select fine-grained kaolin . The advantage is that the kinetic energy of the particles is increased, but the consumption of the agent is high, and the use and processing cost of the carrier mineral is further increased.

â‘¡ without carrier by means of activation of a multivalent cation, can be suspended so anatase, but with a fatty acid flotation collector consumption than other industrial minerals, which may be due to the large surface area of the particles.

3 High shear agitation plays a two-fold role in the flotation. One is to dissociate the anatase from the kaolinite, and the other is to induce shear flocculation between the anatase particles covered by the collector.

4 High-gradient magnetic separation technology has greatly changed the surface of the kaolin industry. Especially the vibration high-gradient magnetic separation can effectively remove the iron- titanium impurities in kaolin, but has little effect on the particle size composition and physical and chemical properties of the product. Produce high quality kaolin products. Dry high gradient magnetic separation treatment of hard kaolin can eliminate product dehydration and reduce product loss, which is suitable for dry and water-free areas. The superconducting high gradient magnetic separator has low energy consumption and large processing capacity. The product purity is high and will be widely used in the kaolin industry.

5 oxidative bleaching and microbial treatment of kaolin products can greatly improve product quality.

6 electrophoresis / electroosmosis dehydration process to increase the slurry concentration to about 70%, and the production cost is much lower than spray drying.

The combination of 7 kinds of operations and the final product are the main features of the kaolin dressing process.

Crowd Control Barrier

Roadway Safety Barricade (also referred to as crowd control barricades, with some versionscalled a french barrier or bike rack in the USA), are commonly used at many public events. security for special events, parades, festivals, concerts and sporting events.Roadway Safety Barricade is ideal where high quality, attractive and durable crowd control is required. Built to proven design standards,Crowd barricade is built from high-quality carbon steel and is hot-dipped galvanized inside and out to ensure long-term weather resistance.
Length
2.0m-2.5m or customized
Height
1.0m-1.5m or customized
Frame Tubing
20mm.25mm.32mm.40mm.42mm.48mm O.D
Upright Tubing
14mm.16mm.20mm.25mm O.D
Finished
Hot dipped galvanized or hot dipped galvanized with PVC coated
Frame Size
2.1*1.1m, 2.4*1.2m or as your requirement
Infill Picket
20mm.25mm.32mm.40mm.42mm.48mm O.D
Spacing
14mm.16mm.20mm.25mm O.D
Feet
60mm.100mm.190mm.200mm
Frame
Detached, Flat, Bridge Type
* Roadway Safety Barricade frames are made from durable 1-1/2" OD 16 gauge steel framing, while uprights are made from 1/2" OD 16 gauge steel tubing. Uprights are fully inserted into the frame before welding, providing extraordinary strength.
* Choose from two foot systems: a detachable foot(bridge and flat)or a fixed foot The feet are removable which makes transportation and storage much easier and more efficient.
* Barricade interlock using the industry standard hook and half-loop fastening system provides a union that prevents a single barricade from being removed from a continuous line of barricades.
* The barriers are light and easy to handle, while being strong and robust at the same time.


Pedestrian Barrier,Traffic Crowd Control Barrier,Portable Pedestrian Barriers,Temporary Crowd Control Barrier

Hebei Yicheng Wire Mesh Products Co., Ltd , https://www.yc-fence.com