When the diesel generator set is working, the pressure cover should be closed, so as not to interfere with the normal operation of the cooling system. The coolant liquid level in the radiator of the water tank should be checked frequently and the coolant should be replenished in time. The liquid level of the coolant is too low, which will affect the cooling effect of the system. Intensify the diesel engine cavitation, but need to be careful to prevent steam from hurting people. So how do we usually maintain the radiator of the water tank?
1, the cleaning of the water radiator
The tank radiator needs to be maintained frequently to ensure heat exchange between the coolant and the air. Under normal circumstances, the diesel engine should be cleaned for the appearance and interior of the radiator of the water tank every 500 hours . To clean up the internal scale and sediment impurities, first drain the water in the radiator, then use a certain amount of clean water (such as tap water) to pass into the radiator core until the water that flows out is clean.
2. Maintenance of water radiator
After the tank radiator has been used for a period of time, if there is a leak, it can be repaired with solder. When the individual pipes are seriously damaged and cannot be repaired, the pipes are allowed to be blocked, but the number of pipes blocked may not exceed three. Otherwise, the water temperature of the diesel engine may exceed the allowable range.
3, daily considerations
The pressure cover on the water tank radiator inlet can increase the pressure of the system to a certain range, which not only increases the boiling point of the coolant, but also enables the system to work normally at a higher temperature and a certain altitude, and also improves the system. Anti-cavitation ability of diesel engines and pumps. The pressure cover is provided with a steam valve and an air valve. When the positive or negative pressure in the radiator of the water tank exceeds a prescribed value, the valve disposed in the pressure cover automatically opens to achieve the purpose of vapor discharge or air ingress.
WRST /Series Solid Tires:
This series is newly developed as our high-end product which can be used ondifferent kinds of poor working environment.
â— Extremely deep tread pattern and unique tread design are two factors which
provide WRST series higher wear resistance than other similar brands.
â— Big tread pattern design increase tire contact, reduce ground pressure, lower
rolling resistance, and strengthen wear resistance.
WonRay /Series Solid Tires:
This series is newly developed as our high-end product which can be used on
different kinds of poor working environment.
â— Extremely deep tread pattern and unique tread design are two factors which
provide WRST series higher wear resistance than other similar brands.
â— Big tread pattern design increase tire contact, reduce ground pressure, lower
rolling resistance, and strengthen wear resistance.
These series chooses new tread pattern, strictly control production cost and truly
achieve low price with high quality.
â— Three compound construction, a new design popular in Europe and America
â— Wear resistant tread compound â— Resilient center compound
â— Super base compound â— Steel ring reinforced
Non-Marking Tire Solid Tires:
High Performance Non-marking tires with light color or other colorful rubber
compound are designed to operate where clean floors are a priority. No mark is left
on the ground when it is running or braking, especially suitable for the application of
enterprises where contamination is strictly prohibited, such as pharmacy, catering
trade, textile, electron, aviation, etc. Any sizes of black resilient and press-on tires
can be made into Non-marking tire.
Solid Forklift Tyres,Construction Tyre,Solid Industrial Forklift Tire,Solid Industrial Tire
SINOMICC INTERNATIONAL , https://www.rockstartyre.com