Introduction of domestic new washing and shrinking machine (wool finishing equipment)

First, the machine is suitable for the fluffing, washing and high-speed washing of combed wool, carded wool and blended fabrics. The fabric treated by the machine has: the suede is clean, the gloss is bright, and the hand feels full and soft.


Second, the characteristics 1, a multi-functional machine can be both fluffed and washed or high-speed washing on the same machine. Compared with the traditional separate fluffing and washing, it can save 50% of the time.
2, 4 storage tanks are separated by stainless steel plates, which avoids the entanglement of fabrics in high-speed operation and causes knotting and parking.
3, 4 shrinkage, 4 shrink rolls, 4 shrink boxes, 4 press plates, so that the length and width of each fabric entering can be controlled synchronously and separately.
4. The shrinking roller is grooved. It consists of 12 pieces of rubber sheet. The material is made of special material. The function is: when the fabric passes through the shrinking bar, it is strong at the protrusion of the shrinking bar. The squeezing enhances the fluffing efficiency of the wool in the fabric. At the groove, since the fabric contains a shrinking agent and air is filled therebetween, the pleats of the fabric are changed in position, and the occurrence of creases and creases is reduced.
5. There are 10 pairs of meniscus-shaped guiding pieces between the upper and lower grooves of each pair of shrinking bars, which are connected with the leading edges of the shrinking plate pressing plate and the bottom plate to guide the fabric to smoothly enter the shrinking box. This device effectively prevents The hole is rolled out due to static electricity or other adsorption caused by the fabric being scratched or wrapped around the stick.
6. In order to make your product feel softer and more elastic, the machine is equipped with a pneumatically controlled impact baffle. This device not only enhances the washing function, but also has a medium and light fluffing effect.
7. There are two high-pressure hair dryers in the machine. When the fabric is fluffed and washed, the air blower blows air to the fabric at a flow rate of 4562 cubic meters per hour, and forms a bag-like bulge before entering the shrinkage, so that the fabric is constantly changing position. The crease and the curling can be avoided without sewing the bag, and the blower mixes the shrinking agent and the washing liquid with the hot air to form a mist jet sprayed on the fabric, so that the shrinkage liquid is uniformly penetrated, and the temperature and the fluffing efficiency of the machine are improved. Reduce the rinse time.
8. Intelligent additive feeding system, easy to switch between washing and shrinking additives, automatic feeding control, nozzles with stainless steel narrow-angle fan-shaped high-impact nozzles, sprayed additives evenly misted, nozzles not only spray additives It can spray cold water, and the whole feeding system consists of: chemical tank-discharge valve-feeding pump-filter-feeding valve-secondary filter-distributor-discharge valve-meter-nozzle, etc. Up to 50%.
9. A steam heating device is installed on the rear side of the top of the machine. The temperature is set between 30~50 °C, and it is used together with the hair dryer. The hair dryer can blow hot air or cold air (can be selected according to the process)
10. A new concept of flushing system. The flushing water temperature is controlled by the steam proportional valve, and the heating is indirect heating. The noise is low, the vibration is small, the heating is fast, and the water temperature is uniform. The principle is as follows: the cold water passes through the water pump to become constant pressure water, and then enters the heat exchange heating, and the heated hot water is sprayed on the fabric through a special nozzle into a fan-shaped mist. The device has been tested to save up to 40% water, save 50%, and the cleaned fabric is clean and avoids the occurrence of creases.
11. Advanced and versatile electrical control system makes operation easier, maintenance more convenient and more user-friendly.


Third, technical parameters 1, working methods: two kinds (washing and fluffing)
2, the number of slots: 4 slots 3, shrinkage adjustment width: 4 ~ 18cm (maximum 18cm)
4, machine frequency: 50HZ, ± 1%
5, the machine uses voltage: 380V, ± 5%
6, machine power: 80KW
7, compressed air: normal use: 6bar, maximum: 8bar pipe: DN15
8, steam pressure: 5 bar pipe: DN40
9, steam consumption: 600kg / h
10, cold water pressure: 2~3bar
11, cold water consumption: 14400kg / h
12, auxiliary box (chemical tank) capacity: large box: 520 L, small box: 310 L
13, machine running speed: 0~400m/min
14. Storage capacity per tank: 200kg (dry weight)
15, the total storage capacity: 800kg (dry weight)
16. Fan blower volume: 2×2281 cubic meters/hour 17. Roller diameter: ¢488mm,
18, roller working width: 208mm
19. Insulation method: direct heating of the internal insulation tank and indirect heating of the hot air. 20, machine dimensions: (height × width × length) 3460 × 4243 × 4588mm
21, machine weight: about 9.5T




Granule Drying Mixer

Zhangjiagang Huade Machinery Technology Co.,Ltd , https://www.tophdextruder.com