Type flotation equipment, specifications selection and determine the nature of the ore, equipment performance, scale beneficiation plant, processes, structure, and other factors related to the division series. Pay attention to the selection of flotation machine:
1. Ore properties and selection operation requirements For coarse ore and large ore, high concentration flotation method is generally used to reduce the sedimentation velocity of the ore particles and reduce the deposition of ore particles. Therefore, a high-energy mechanical agitation flotation machine should be used. The flotation machine delivers pulp at a high speed, has a high mixing capacity, and is easy to start after shutdown. In the low-grade sulfide ore flotation process, low-speed inflation is more favorable for the sorting effect. For ore that is prone to viscous foam during the flotation process, a flotation machine with a larger aeration volume should be selected. The selected job is to improve the grade of the concentrate, the foam layer should be thinner, to create conditions for better separation of the gangue, so the selection should be different from the flotation machine for rough selection and sweeping.
2. According to the reasonable choice of the slurry flow rate to ensure the selection effect, it is necessary to ensure that the slurry in each flotation tank has a certain residence time. If the time is too short or too long, the loss of useful minerals will occur, so the flotation machine specifications Must be compatible with the size of the concentrator.
3. Determine the specification and quantity of flotation machine through technical and economic comparison In the comparison of schemes, general comparison should be made in the selection of indicators, operating expenses, operation management, maintenance and overhaul, but the selection factor should be the dominant factor.
4. Pay attention to the quality of equipment manufacturing and the supply of spare parts and spare parts.
The number of slots required for a mechanically agitated flotation machine is calculated as follows:
Where n is the number of slots of the flotation machine required for a job,
V1 - the effective volume of the flotation machine, m 3 ;
T——the flotation time of the operation, minutes;
δ——Ore specific gravity, ton/ m3 ;
K——concentration of pulp, %;
Q - treatment of minerals, tons / day.
Xinxiang SKF single side lapping machine
1. Excellent and reliable machine performance.
2. Be widely used in auto parts, pneumatic elements, air-conditioner and refrigerator compressor parts, carbide blade, powder metallurgy, etc.
3. Whole set of research and design, inspection and after sell service.
4. Free test grinding, good machine price.
DM710 Single Side Lapping Machine
Precision Lapping Machine,Lapper Machine,Polishing Equipment,Dm710 Single Side Lapping Machine
Xinxiang SKF machinery Co., Ltd. , https://www.facegrindingmachine.com