The working principle of the vibrating conveyor is to force the carrier (conveyor or conveying tower) through the exciter to make a simple harmonic motion or approximate harmonic vibration in a certain direction. When the acceleration of the vibration reaches a certain value, the material is carried. The body jumps or slides in the direction of transport.
The structure of the conveyor is simple, the bearing body is small in wear, can be fed and unloaded at multiple points, and can transport high-temperature materials (generally 200 ° C, up to 700 ° C when using heat-resistant steel as a carrier or taking cooling measures) If the carrier is slightly improved, the process requirements of screening, drying, heating, cooling, etc. of the material can also be achieved when conveying the material.
This kind of conveyor conveys powdery materials with poor effect, and it is not suitable to transport viscous materials with more water. It is not efficient when transporting upwards.
Vibrating conveyors can be divided into horizontal and vertical types according to the direction of conveying materials. According to the different driving modes, the vibrating conveyor can be divided into three types: electromagnetic vibration, inertial vibration and eccentric link vibration.
Second, electromagnetic vibration conveyor
The electromagnetic vibrating conveyor is similar to the electromagnetic vibrating feeder, except that the length of the conveyor is longer, up to 8 meters. In order to lengthen the conveying distance, multiple electromagnetic vibrators can be used for driving, but synchronous adjustment is more difficult. Commonly used electromagnetic vibration conveyors are available in GZ and ZDF types.
(1) GZ type electromagnetic vibration tube conveyor GZ type electromagnetic vibration tube conveyor is suitable for conveying high temperature materials with high dust, volatility and temperature below 300 °C. It is possible to transport 2 to 3 conveyors in a rigid connection to increase the conveying distance.
(2) ZDF type electromagnetic vibration conveyor ZDF type electromagnetic vibration conveyor is a double-mass resonance type. Due to the small vibration load, there is no special requirement for the equipment foundation.
Third, inertial vibration conveyor inertial vibration conveyor is driven by inertial vibration or vibration motor. Technical performance of the GZS inertial vibrating conveyor used in the cement industry.
4. The driving mechanism of the eccentric connecting rod vibrating conveyor of the eccentric connecting rod vibrating conveyor has three types: elastic connecting rod type, semi-rigid connecting rod type and rigid connecting rod type.
STABLE AT LOW SPEED
Closed-loop control pressure and flow, at low pressure and low flow operation performance is particularly outstanding, shoot rubber speed in less than 1 mm/sec without crawing,pluse,high stability. System according to the actual product process requirements, set arbitrary pressure and flow, avoid excess heat generation, the oil temperature relative to the traditional injection molding machines is stable. In addition, the pressure stability of the pressure and flow rate, high control accuracy and repeat precision.
MACHINE SERVICE LIFE LONGER AND CLEANER WORKING ENVIRONMENT
Less noise emissioins
The noise of th hydraulic system control within the scope of the national standard.
Low heat and cooling energy demand is low, more suitable for production environment with air conditioning.
Injection Molding Machine boot into the steady-state oil temperature rise of 8℃-10℃
Auto Parts Specially Developed Machine
Auto Parts Inject Molding Machine, Auto Parts Moulding Machine, Auto Parts Specially Developed Machine
Ningbo Shuangma Machinery Industry Co., Ltd , https://www.bolemachinery.com