How to Select End Milling and Horizontal Milling in Machining

End mills have a wide range of applications. End mills, chucks, drills, etc. can be used. Millable keyway, milling plane, boring,,,,,, horizontal milling can also use the above various tools, but not as convenient as the end of the mill, mainly the use of rack reinforcement tools (mainly three-edge cutter, platter milling Knife, etc.) Strength. Millable slot, milling plane, cut,,,,,,,

It is better to open the deep right-angle groove universal milling. In fact, when the universal milling is used for horizontal milling, the steel is good, which is conducive to the combination of tool milling and milling. Compared to you milling three right-angle through grooves on a square iron, you can mill it once. Three three-edged swords are installed and formed once. The universal milling head is generally on the universal milling machine. The universal milling machine is mainly a horizontal milling machine, but a small vertical milling head is added on the beam. The vertical milling head can rotate around the front and rear, but the power and rigidity are relatively poor. The upright milling head can only rotate around the angle, and the rotation angle range is relatively small.

Ordinary milling machine discrete milling and horizontal milling, horizontal milling is usually called universal milling, can be geared rack, can also be milling larger plane, generally equipped with vertical milling head, more functions, but the rigidity is poor, low efficiency. Milling and horizontal milling prices are similar, good rigidity and high efficiency.