Our mining-industry requirements Reference Manual provides general industrial requirements of lead ore bed is: cut-off grade sulphide ore is 0.3-0.5%, the lowest industrial grade of 0.7 to 1.0%; cut-off grade oxide ores 0.5-1% , the lowest industrial grade 1.5-2%; cut-off grade ore mixing 0.5-0.7%, the lowest industrial grade 1-1.5%; zinc deposit general industrial requirements are: cut-off grade sulphide ore 0.5-1% minimum The industrial grade is 1-2%; the cut-off grade of oxidized ore is 1.5-2%, the lowest industrial grade is 3-6%; the cut-off grade of mixed ore is 0.8-1.5%, and the lowest industrial grade is 2-3%.
This kind of parts are used for John Deere Chassis , The main parts of the chassis are: gearbox: transmission assembly, gear and shaft, shift fork shaft, shift pull rod, shift fork, transmission fastener. (2) Front axle: The accessories of differential transmission and steering control device are spring device, steering mechanism, steering horizontal tie rod, steering wheel, steering column tube, shell, hydraulic oil tank and connecting parts, hose. (3) The rear axle fittings include rear axle body and spring device with mounting parts. (4) Wheel = brake accessories include steel spoke wheel, drum brake, brake pallet, wheel brake cylinder, brake shoe with brake disc, brake cable, vacuum hose group for brake main cylinder, compensation tank, brake fluid, brake hard pipe, brake hose, brake booster, climbing hook brake, disc brake brake pliers, brake disc, repair components. (5) Hand-operated and foot-lever devices are fitted with shift-operated devices, damper cables, brakes, clutch pedals, clutch cables, accelerator pedals and accelerator cables. if you need the Chassis Parts, pls contact us freely !
Chassis Parts For John Deere,John Deere Transmission Parts for Sale,John Deere Undercarriage Parts,John Deere Front Axle Parts
Hangzhou Holdwell Mechanical&Electrical Co.,LTD , https://www.dieselpart.nl