Recently, Toyota Motor (China) Investment Co., Ltd. filed a recall plan with the General Administration of Quality Supervision, Inspection and Quarantine, and will recall some imports from May 20, 2015 to January 12, 2016, starting from March 31, 2018. - The 2016 Lexus NX, RX and Toyota Elfa series. According to the company's statistics, there are 22,648 vehicles in mainland China, as follows:

Part of the 2015 Lexus NX series imported from May 25, 2015 to October 16, 2015, totaling 17,454 vehicles;

Part of the imported 2015-2016 Lexus RX series cars produced from June 4, 2015 to January 12, 2016, totaling 3,336 vehicles;

Part of the 2015 Toyota Alfa series imported from May 20, 2015 to October 28, 2015, totaling 1,858 vehicles.

In the air bag control system of some vehicles within the above recall range, due to improper production conditions of the IC chip in the acceleration sensor or the pressure sensor, an open circuit may occur inside the IC, which may cause the air bag warning lamp to light up, and the air bag cannot be deployed normally. There are security risks.

Toyota Motor (China) Investment Co., Ltd. will inspect the production number of each sensor for the vehicles within the recall range. If it is a faulty part, it will be replaced with the modified qualified parts free of charge to eliminate the defects.

Relevant users should drive carefully. If the airbag warning light on the instrument panel is lit, contact the nearest dealer immediately to inspect and repair the vehicle. The user should contact the dealer for repair as soon as possible after the recall operation begins.

Toyota Motor (China) Investment Co., Ltd. will notify customers by registered mail. Lexus users can call the Lexus Customer Service Center or 400-810-2772 for information on this recall; Elfa users can call GAC Toyota Customer Service Center Service or 400-830-8888 for information on this recall. Users can also visit the AQSIQ website inspection and supervision department (jyjgs.aqsiq.gov.cn), the AQSIQ Defective Product Management Center website () and the WeChat public account (AQSIQDPAC) to learn more. information. In addition, you can also call the Defective Product Management Center hotline or the local entry-exit inspection and quarantine agency's quality hotline: 12365 (switch No. 2), reflecting the problems in the implementation of the recall or submitting defects.

STARTER BRUSH HOLDER ASSEMBLY
A BRUSH IS A DEVICE WHICH CONDUCTS CURRENT BETWEEN STATIONARY WIRES AND MOVING PARTS, MOST COMMONLY IN A ROTATING SHAFT. TYPICAL APPLICATIONS INCLUDE ELECTRIC MOTORS, ALTERNATORS AND ELECTRIC GENERATORS.
FOR DELCO, BOSCH,DENSO, LUCAS, VALEO, FORD,MITSUBISHI,SAWAFUJI ETC

Starter Motor Brush Holder

Starter Motor Brush Holder,Starter Drive,Starter Motor Brushes,Bosch Starter Motor Brushes

Ningbo zhongwang auto fittings co.,ltd , https://www.zowoparts.com