1. Flame cutting Flame cutting is the use of oxygen and gas (acetylene, propane, liquefied petroleum gas, etc.) combustion heat energy to preheat the workpiece to a certain temperature, the high-speed cutting oxygen flow, so that the preheated metal combustion and release heat Cutting method.
2. Plasma cutting Plasma cutting is the use of high energy density plasma and high-speed plasma flow, the molten metal blown away from the cut to form a continuous cut.
Plasma cutting can cut carbon steel, stainless steel, copper, aluminum and other metal materials or some non-metallic materials. The cutting speed is fast and the thermal deformation is small, but the cutting width and the cutting surface have a large angle of inclination. And the cutting and cutting effect (cut width and cutting angle) of the plasma cutting power supply produced by different manufacturers is quite different.
3. Laser cutting Laser cutting is a processing method that uses a high-energy laser beam as a "cutting tool" to thermally cut a material. Cutting of metal, non-metal plates, etc. can be achieved.
Laser cutting according to the type of laser can be divided into gas laser cutting and solid laser cutting. Laser cutting processing speed, high precision machining. The thickness of the laser cutting is determined by the power of the laser generator.
4. Water jet cutting High pressure water jet cutting is to pressurize the water to super high pressure (100-400 Mpa), and then it is ejected through throttling orifice (∮0.15-0.4mm), with the aid of high speed and high intensity water jet (or re The impact of the abrasive is added to the cutting.
With high-pressure water jets, various metal and non-metal materials can be cut.
Water jets are not yet common.
5. Wire-cutting wire cutting, also known as EDM. The metal wire is used as the negative electrode, and the workpieces of the conductive or semi-conductive material rely on electric spark discharge to make the workpiece continuously galvanic. The metal wire is constantly moving up and down. The workpiece is driven by the numerical control system and the relative wire speed is very slow. However, its machining accuracy and finish are very high and it belongs to the finishing category. Widely used in the processing of abrasives and other parts.
6. Shears Shears are used to move the upper blade and the fixed lower blade, using a reasonable blade gap, the shear force of a variety of thickness of the metal plate, so that the plate fractured and separated according to the required size.
7. Punch (CNC punch)
The CNC turret punch press (NCT) combines the mechanical, electrical, hydraulic, and gas-to-air integration and is a pressure processing device that performs punching and shallow drawing on the plate.
CNC turret punch (NCT) consists of computer control system, mechanical or hydraulic power system, servo feeding mechanism, mold library, mold selection system, and peripheral programming system.
CNC turret punch press (NCT) is a machining program programmed by programming software (or manual). The servo feeding mechanism sends the board material to the position to be machined. At the same time, the mold selection system selects the corresponding mold in the mold library. The hydraulic power system Stamping according to the program to automatically complete the processing of the workpiece.
The throat depth of a digitally controlled turret punch (NCT) is the distance from the punch center to the side panel of the bed. The size of throat depth directly determines the width dimension of the processed sheet (ie, the sheet size processed along the length of the bed).
Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: /